SCCM PXE Boot – File Not Found Error

On Server which is hosting WDS service,

1.       Stop WDS service

2.       C:\WINDOWS\TEMP\PXEBootFiles\Windows

3.       Start WDS service

If you get any following errors, or the WDS service will not start, try to reinstall WDS and PXE.

PXE-E53: No boot filename received 
PXE-T01: File not found 
PXE-E3B: TFTP Error - File not Found 
PXE-E55 Proxy DHCP Service did not reply to request on port 4011 
PXE-T04: Access Violation 
PXE-E36: Error Received from TFTP Server 
PXE-M-F Exiting PXE Rom

Reinstalling WDS And The PXE Service Point

1.       Remove the SMS PXE role. Look at the PXESetup.log file to verify that the uninstall is complete and successful.

1.       Uninstall the WDS server.

2.       Reboot the machine.

3.       Re-install the WDS server, but "do not configure it". Do nothing at all other than installing WDS.

4.       Add the SMS PXE role. Look at the PXESetup.log file to verify that the installation is complete and successful.

5.       Add the boot images to the SMS PXE DP share. Look at the distmgr.log file to verify that the replication of the boot image to the DP is complete and successful.

6.       Try booting a PXE client.

For Detailed information on  TechNet